Rowboat Kiili paat 440 is built with a wedge-shaped bottom and suits particularly well for riding in the sharpe wave of the Baltic Sea and Lake Peipus. Naturally, the smaller rivers and lakes are no problem either. Kiili paat can be used for a joyride, fishing, transportation of goods, and suits well as a small netboat.  Due to its economical and deliberate shape of the bottom, Kiili paat glides easily in the water and cuts well through the waves when using the engine as well as the paddles. The boat is made as a whole in a mould, not glued together from pieces. We used 5 hp two-cycle engine and it took us less than an hour for ~10 km with 1 litre of petrol on a sea without waves. Driving licence for a boat is not needed to drive Kiili paat with an engine. We provide transportation for the boat within Estonia. When selecting a rear engine for Kiili Paat 440, follow the recommendations for power of engines: max 6 kW/8 hp. For rides on inland waters, use an engine with lower power or electrical engine. When riding in Peipus or on the sea and the rides are longer, the recommended choice of engine is 4 hp or more. Whether 4- or 2-cycle, it is already the choice of the purchaser. 4-cycle engine pollutes less, the gear is more stable. When selecting an engine’s foot length, the trans of Kiili Paat 440 is 510 mm. Therefore, an engine with a long foot (L); 20´´; 510mm is suitable. It is possible to ride also with a short foot (S); 15´´; 380 mm, but when the speed increases, the boat will start lifting the bow. It is convenient to ride with the engine that has the petrol tank under the engine cover. NB! When going for a ride, take along an extra reserve of petrol or mixture.